IO TERMINAL
Showing all 25 results
-
Fiat, IO Terminal, IO TERMINAL, Software & Tokens
I/O Terminal FIAT BSI Simcard License – ECU Programming Activation
-7%
Fiat, IO Terminal, IO TERMINAL, Software & TokensI/O Terminal FIAT BSI Simcard License – ECU Programming Activation
Short Product Description:
The I/O Terminal simcard license provides advanced ECU programming and diagnostic capabilities for a wide range of FIAT and OPEL vehicles. This tool allows reading and writing operations, PIN code extraction, and odometer calibration, either via OBD or bench mode—no need to open the ECU.
Note: This product does not include the required hardware.
SKU: IO06 -
IO Terminal, IO Terminal, IO TERMINAL, Programming Tools & Adapters
I/O Terminal Hardware 11.0 Single SIM Card Interface for ECU Programming and Diagnostics
IO Terminal, IO Terminal, IO TERMINAL, Programming Tools & AdaptersI/O Terminal Hardware 11.0 Single SIM Card Interface for ECU Programming and Diagnostics
Product Short Description:
The I/O Terminal is a powerful hardware and software solution designed for advanced communication with a wide range of Electronic Control Units (ECUs), automatic transmissions, and Body Control Modules (BSI) across multiple vehicle brands. Supported manufacturers include VAG, Mitsubishi, Mazda, Ford, Nissan, Subaru, Suzuki, Opel, Volvo, Alfa Romeo, Fiat, Jaguar, Land Rover, Lancia, Maserati, Hyundai, Kia, Daewoo, and many others. The system communicates via the standard OBD-II diagnostic port.
SKU: n/a -
IO Terminal, IO TERMINAL, Software & Tokens
I/O Terminal Marelli & Marelli 2 ECU Activation – Simcard License for Full Read/Write Support
-8%
IO Terminal, IO TERMINAL, Software & TokensI/O Terminal Marelli & Marelli 2 ECU Activation – Simcard License for Full Read/Write Support
Short Product Description:
The I/O Terminal offers extensive support for both Opel and Fiat ECUs, enabling advanced ECU operations such as full read/write, PIN code extraction, and mileage correction. For Opel models like Z13DT, Z13DTJ, and Z13DTH, these functions can be performed via OBD or on bench, specifically on ECUs including MJD 6JO, 6O2, and 6O3.
Note: This product does not include the required hardware.
SKU: IO02 -
IO Terminal, IO TERMINAL, Software & Tokens
I/O Terminal Motorcycle ECU Programming Tool Activation (Simcard License)
-8%
IO Terminal, IO TERMINAL, Software & TokensI/O Terminal Motorcycle ECU Programming Tool Activation (Simcard License)
Short Product Description:
The I/O Terminal Motorcycle ECU Tool enables full flash reading and writing of DUCATI bike ECUs manufactured by Continental. All operations are performed seamlessly over the CAN interface—no need to open the ECU.
Note: This product does not include the required hardware.
SKU: IO07 -
-
IO TERMINAL, Software & Tokens
I/O Terminal Multi Tool FCARFHUBLIC00001 Software Activation – Enhanced Functionality for Automotive Diagnostics
IO TERMINAL, Software & TokensI/O Terminal Multi Tool FCARFHUBLIC00001 Software Activation – Enhanced Functionality for Automotive Diagnostics
Short Product Description:
Activate the I/O Terminal Multi Tool FCARFHUBLIC00001 Software for advanced functionality with the I/O Terminal hardware. This software activation enables the reading and writing of FCA RFHM/RFHUB (Keyless Vehicle Modules), including microcontroller memory (FLASH + EEPROM) and external EEPROM. The license name for this feature is FCARFHUBLIC00001. Complete software and wiring diagrams are available for download.
Note: This product does not include the required hardware.
SKU: n/a -
Fiat, IO Terminal, IO TERMINAL, Software & Tokens
I/O Terminal MULTITOOL FIAT BSI2 Activation – ECU & BSI Programming Simcard
-7%
Fiat, IO Terminal, IO TERMINAL, Software & TokensI/O Terminal MULTITOOL FIAT BSI2 Activation – ECU & BSI Programming Simcard
Short Product Description:
The I/O Terminal MULTITOOL FIAT BSI2 Activation allows full support for reading and writing FIAT, FORD, and PSA BSI (Body Control Module) units manufactured by Delphi and Continental. This software function enables users to read/write EEPROM and flash memory, extract PIN codes, and display key preparation data directly from the EEPROM or data flash dump.
Note: This product does not include the required hardware.
SKU: IO11 -
IO TERMINAL, Software & Tokens
I/O Terminal MULTITOOL FORD BCM Activation – Simcard for Body Control Module Programming
IO TERMINAL, Software & TokensI/O Terminal MULTITOOL FORD BCM Activation – Simcard for Body Control Module Programming
Short Product Description:
This activation enables reading and writing of FORD Body Control Modules (BCM) manufactured by DELPHI, CONTINENTAL, SIEMENS, LEAR, and TEMIC, via CAN (OBD or bench connection). It supports full EEPROM and FLASH operations, offering advanced diagnostics and programming capabilities for a wide range of BCM types.
Note: This product does not include the required hardware.
SKU: n/a -
Chevrolet, IO TERMINAL, IO Terminal, Software & Tokens
I/O Terminal MULTITOOL OPEL & GM ECU Activation – SIM Card License for ECU Programming
-25%
Chevrolet, IO TERMINAL, IO Terminal, Software & TokensI/O Terminal MULTITOOL OPEL & GM ECU Activation – SIM Card License for ECU Programming
Short Product Description:
The I/O Terminal MULTITOOL OPEL/GM ECU Activation enables advanced ECU programming and diagnostics for a wide range of OPEL and General Motors (GM) vehicles. This activation allows users to perform full ECU reading and writing operations via CAN, either through OBD or direct bench connection. Additionally, the software supports Bootpin Recovery Mode for secure access to ECUs that are not responsive via standard communication.
SKU: IO13 -
Chevrolet, IO Terminal, IO TERMINAL, Software & Tokens
I/O Terminal MULTITOOL OPEL BCM Simcard Activation – Body Control Module Programming Tool
-8%
Chevrolet, IO Terminal, IO TERMINAL, Software & TokensI/O Terminal MULTITOOL OPEL BCM Simcard Activation – Body Control Module Programming Tool
Short Product Description:
The I/O Terminal MULTITOOL OPEL BCM activation enables powerful diagnostics and programming capabilities for Body Control Modules (BCMs) in OPEL and GM vehicles. This activation allows users to read and write data, extract PIN codes from EEPROM or flash dumps, reset PINs, modify odometer readings, and change VIN numbers—providing full control over module configuration.
Note: This product does not include the required software.
SKU: IO12 -
Chevrolet, IO Terminal, IO TERMINAL, Software & Tokens
I/O Terminal MULTITOOL OPEL/GM EPS Activation – Simcard for Electronic Power Steering Programming
-8%
Chevrolet, IO Terminal, IO TERMINAL, Software & TokensI/O Terminal MULTITOOL OPEL/GM EPS Activation – Simcard for Electronic Power Steering Programming
Short Product Description:
The I/O Terminal MULTITOOL OPEL/GM EPS Activation enables reading and writing of Electronic Power Steering (EPS) modules in Opel and GM vehicles via CAN, either through the OBD port or direct bench connection. This activation provides full access to EPS module programming, including flash and EEPROM memory operations.
Note: This product does not include the required hardware.
SKU: IO15 -
Chevrolet, IO Terminal, IO TERMINAL, Software & Tokens
I/O Terminal MULTITOOL OPEL/GM TCM Simcard Activation – Transmission Control Module Programming
-8%
Chevrolet, IO Terminal, IO TERMINAL, Software & TokensI/O Terminal MULTITOOL OPEL/GM TCM Simcard Activation – Transmission Control Module Programming
Short Product Description:
The I/O Terminal MULTITOOL OPEL/GM TCM Activation enables full reading and writing capabilities for OPEL and GM Transmission Control Modules (TCMs) via CAN, either through OBD or bench connection. This activation supports various automatic transmission models, providing comprehensive access to flash memory for diagnostics, repair, and tuning purposes.
Note: This product does not include the required hardware.
SKU: IO14 -
IO TERMINAL, IO Terminal, Software & Tokens
I/O Terminal MULTITOOL PSA BSI Activation via SIM Card – ECU Flash & EEPROM Programming
-7%
IO TERMINAL, IO Terminal, Software & TokensI/O Terminal MULTITOOL PSA BSI Activation via SIM Card – ECU Flash & EEPROM Programming
Short Product Description:
The I/O Terminal MULTITOOL PSA BSI is a highly versatile tool designed for efficient work with the Body Control Module (BSI) of PSA vehicles, including Peugeot and Citroen models. It provides a comprehensive suite of features for diagnostics and operations, ensuring effective support for various BSI modules.
Note: This product does not include the required hardware.
SKU: IO09 -
IO Terminal, IO TERMINAL, Mercedes, Software & Tokens
I/O Terminal MULTITOOL SMART SAM Activation – Simcard License for ECU and SAM Module Programming
-7%
IO Terminal, IO TERMINAL, Mercedes, Software & TokensI/O Terminal MULTITOOL SMART SAM Activation – Simcard License for ECU and SAM Module Programming
Short Description Product:
The I/O Terminal MULTITOOL SMART SAM is a powerful and adaptable programming solution tailored for working with SMART vehicle SAM (Signal Acquisition Module) units. This tool enables advanced diagnostics, reading, and writing functions, offering full support for EEPROM and FLASH memory operations. Ideal for automotive professionals, it provides reliable and efficient programming capabilities for multiple SAM module variants.
Note: This product does not include the required hardware.
SKU: IO10 -
IO TERMINAL, Software & Tokens
I/O Terminal Opel PIM ECU Activation License – OPELPIMLIC000001
Short Product Description:
This tool supplement for the VOLVO CEM P2 I/O Terminal provides capabilities that would typically require opening the ECU and connecting a BDM/Boot programmer. However, you can complete these operations without opening the ECU and, in some cases, perform everything via OBD.
Note: This product does not include the required hardware.
SKU: n/a -
IO Terminal, IO TERMINAL, Software & Tokens
I/O Terminal Siemens SIM Card Activation – ECU Programming & Diagnostics Module
IO Terminal, IO TERMINAL, Software & TokensI/O Terminal Siemens SIM Card Activation – ECU Programming & Diagnostics Module
Product Short Description:
-
EEPROM reading and writing
-
PIN code extraction
-
ECU virginizing
-
Service history (date/mileage/device ID) reading and editing
Note: This product does not include the required hardware.
SKU: IO01 -
-
IO TERMINAL, Software & Tokens
I/O Terminal VAG DSG & Easytronic ECU Programming Activation (Simcard License)
IO TERMINAL, Software & TokensI/O Terminal VAG DSG & Easytronic ECU Programming Activation (Simcard License)
Short Product Description:
Unlock advanced ECU programming capabilities with the I/O Terminal VAG DSG & Easytronic Activation (Simcard License). This powerful module enables full reading and writing of VAG DSG and Opel Easytronic transmission control units via OBD or bench connection—no need to open the TCU physically.
Note: This product does not include the required hardware.
SKU: n/a -
IO Terminal, IO TERMINAL, Software & Tokens, Volvo
I/O Terminal VOLVO Simcard License – ECU Tool Activation for Flash & EEPROM
-7%
IO Terminal, IO TERMINAL, Software & Tokens, VolvoI/O Terminal VOLVO Simcard License – ECU Tool Activation for Flash & EEPROM
Product Short Description:
The I/O Terminal VOLVO Tool enables comprehensive read and write access to various modules used in Volvo vehicles. This includes dashboard clusters, ICM, rear-view mirrors, EPS, airbag units, PHM (phone modules), and CCM (climate control modules). Flash and EEPROM operations are supported across a wide range of microcontrollers and communication protocols.
Note: This product does not include the required hardware.
SKU: IO08
